EMISI GAS FORMALDEHIDA PAPAN PARTIKEL DARI BEBERAPA JENIS KAYU

Rozak Memed

Abstract


The result of determination of formaldehyde emission from particleboard samples glued  with urea formaldehyde and mixture  of UF and MF resin is reported in this paper. The particleboard  samples were selected from two different factories  in addition  to  those prepared  in the laboratory  at the center.

The  values of formaldehyde emission  of particleboard  prepared  in the laboratory  are between 6.154 ppm (Jeungjing)  and  18.720 ppm (meranti kuning), from  factory  A between  0.295  ppm-7.710 ppm;  while from  factory  B between  13.246 ppm-23.691 ppm.  Board samples from factory A glued with mixture of  UF and MF  resins.  on the other  hand,  show an average emission  value of  0.295 ppm.


References


Anonymous, 1981. Standard for particleboard for mobile home decking. National Particleboard Association (NPA).

Low emission formaldehyde plywood. Pamolite Adhesive Industry.

Formaldehyde emission from particleboard a new method for determination. Forest Products Journal Vol. 29. No.1.

IHPA-Class 1 spesification for low formaldehyde emission plywood. Imported Hardwood Plywood Association.

Food and Agriculture Organization (FAO), 1959.

Development in test methods for fibreboard and particleboard.

Jung Ihn Hyun, Yeon Heung Chung, Yong Dae Lee, Jae Myeong Jo, 1981. The research reports of the Forest Research Institute No. 28. Forest Re- search institute. Office of Forestry, Seoul, Korea.




DOI: https://doi.org/10.20886/jphh.1987.4.2.27-29

Refbacks

  • There are currently no refbacks.


JURNAL PENELITIAN HASIL HUTAN INDEXED BY:

More...


Copyright © 2015 | Jurnal Penelitian Hasil Hutan (JPHH, Journal of Forest Products Research)

eISSN : 2442-8957        pISSN : 0216-4329

       

JPHH is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.