SIFAT PEMESINAN JENIS KAYU JAWA BARAT
Abstract
This paper presents the result of test on machining properties of 28 wood species from Bogor and Sukabumi, West Java. The test method used was the modified ASTM D-1666 described in the Forest Products Research Institut Report No. 160 (1982). The samples (25 pieces/species) were dried to equilibrium moisture content condition (15 to 18%). The machining properties investigated were planning, shaping, boring, mortising, turning and sanding.
The species that have good or very good machining properties are kobari, pasang jambe, pasang beureum, mahoni daun lebar, pentadesma, cloropora, eucalyptus, meranti batu, pinus I, mahoni, mahagoni and pinus III. Species such as kelumpang, entorolobium and cecropia are consistenlly poorer. The other species are good in some properties and fair or poor in others.
Full Text:
PDF (Bahasa Indonesia)References
ASTM, 1974. Standard Method of Conducting Machining Tests of Wood and Wood-base Materials. Annual book of ASTM, Philadelphia.
Abdurachman, A.J. dan Karnasudirdja, S. 1982. Sifat Pemesinan Kayu-kayu Indonesia. Laporan BPHH No. 160, Bogor.
Koch, 1964. Wood Machining Process. The Ronald Press Co. New York.
Kubler, H. 1980. Wood as Building and Hobby Material. John Wiley & Sons. New York.
Oey Djoen Seng, 1964. Berat jenis dari jenis-jenis kayu Indonesia dan Pengertian Berat Kayu untuk Keperluan Praktek. Pengumuman LPHH No. 1, Bogor.
DOI: https://doi.org/10.20886/jphh.1987.4.3.54-64
Refbacks
- There are currently no refbacks.
JURNAL PENELITIAN HASIL HUTAN INDEXED BY:
Copyright © 2015 | Jurnal Penelitian Hasil Hutan (JPHH, Journal of Forest Products Research)
eISSN : 2442-8957 pISSN : 0216-4329
JPHH is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.