SIFAT MEKANIS GELAGAR KOTAK PERCOBAAN UNTUK KAYU KONSTRUKSI
Abstract
Experimental laminated box beam were constructed for their mechanical properties test. The pile component of box beam was prepared consisting of solid wood as upperside and downside flange and plywood or particleboard as left and right web. The dimension of box beam is 9.1 cm x 20 cm x 244 cm where the dimension of solid wood are 5.5 cm x3.5 cm x 244 cm and the dimensions of plywood and particleboard are 1.8 cm x 20 cm x 244 cm. All components were onnected by glue, nail and combination of both. The strength of box beam is based on the static bending test especially its modulus of elasticity (MOE) and modulus of rupture (MOR) by Baldwin universal testing machine with ASTM method.
The results show that the experimental box beam produced had adequate MOE and MOR for construction purpose. The nail and nail-glue combination to connect plywood and particleboard components with solid wood give high value of MOE and MOR of box beam.
Full Text:
PDF (Bahasa Indonesia)References
Anonymus, 1956. Laminated beam from two species of tim- ber, Forest Products Journal 6 (6) : 21 - 25
Annual Book of A.S.T.M. Standards. Phila-delphia.
Wood Handbook. Wood as our engeneering material. Forest Product Laboratory. Forest Service U.S,D.A. Agriculture Handbook No. 72.
Peraturan Konstruksi Kayu Indonesia Nl-5,PKKI-1961. Lembaga Penyelidikan Masalah Bangunan. Departemen Pekerjaan Umum dan Tenaga Listrik. Yaya- san Dana Normalisasi Indonesia. Bandung.
Brown, H.P.; A.J. Panshin and C.C. Forsaith. 1952. Text-book of Wood Technology, Volume II. McGraw-Hill Book Company Inc. New York, Toronto, London.
Bodig, J.J. and B.A. Jayne. 1982. Mechanics of Wood and Wood Composites. Van Nostrand Reinhold Company Inc. New York, Toronto, London.
Hidayat, T. 1983. Studi Hubungan Sifat Mekanis lentur kayu agathis (Agathis loranthifolia Salish) sistem panter dan contoh kecil bebas cacat dengan contoh kayu kon- struksi. Skripsi Fakultas Kehutanan IPB. Bogor. Tidak diterbitkan.
Malik, P. 1985. Analisa Balok Susun Bentuk Pipa dengan Paku. Skripsi Fakultas Teknik -JurusanSipil, UKI. Jakar- ta. Tidak diterbitkan.
Marian, J.E. 1967. Wood Reconstituted Wood and Glued Laminated Structures. didalam K. Houwink and G. Solomon. 1967. Adhesion and Adhesives. Volume II. Else- vier Publishing Company Amsterdam, London, New York.
Surjokusumo, S. 1982. Perancangan mesin pemilah kayu bangunan Panter L-2. Bulletin Penelitian IPB, Volume 3 No. 1 Bogor.
Wangaard, FF .. 1950. The mechanical properties of wood. John Wiley & Sons Inc., New York.
Wirjomartono, S. 1958. Konstruksi kayu. Jilid I. Universitas Gajah Mada, Yogyakarta.
DOI: https://doi.org/10.20886/jphh.1989.6.3.163-170
Refbacks
- There are currently no refbacks.
JURNAL PENELITIAN HASIL HUTAN INDEXED BY:
Copyright © 2015 | Jurnal Penelitian Hasil Hutan (JPHH, Journal of Forest Products Research)
eISSN : 2442-8957 pISSN : 0216-4329
JPHH is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.