PENGARUH KECANGGIHAN MESIN TERHADAP AKURASI UKURAN KAYU GERGAJIAN
Abstract
This study was carried out at a sawmill in Lampung, Sumatera. The sawmill had two unit of band-headrigs with different type of machines, namely a conventional mill and a modern one. The design of the modern mill is more sophis- ticated in characteristics as figured in Table 1. Accuracy of sawn timber was determined by comparison between actual size and target size of the lumber thickness. The data were collected from measurement of 1OO pieces of lumber selected randomly from each mill production.
The result showed that the machine sophistication has a significant effect on sawn timber size accuracy. The more sophisticated machine can give more than 10% benefit of sawn timber production compared to the conventional one. The level of sawing accuracy on conventional mill is 88.15%, whereas the modern mill could reach 98.29%.
Full Text:
PDF (Bahasa Indonesia)References
Haygreen, J.G. and Bowyer, J.L. 1982. Forest Products and Wood Science. The lowa State University Press, Ames, Iowa. pp. 325 - 328.
Nasoetion, A.H. dan Barizi. 1976. Metode Statistika. PT.Gramedia, Jakarta. pp. 122 - 138.
Steele, P.H. 1984. Factors Determining Lumber Recovery in Sawmilling. Gen. Tech. Rep. FPL-39. USDA, Forest Product's Laboratory, Wisconsin.pp. 2-6.
Uddeholm. 1983. How to increase Profit in Bandsawing. Uddeholm Strip Steel AB, Sweden. pp. 8 -11; 34 - 37.
DOI: https://doi.org/10.20886/jphh.1989.6.5.331-333
Refbacks
- There are currently no refbacks.
JURNAL PENELITIAN HASIL HUTAN INDEXED BY:
Copyright © 2015 | Jurnal Penelitian Hasil Hutan (JPHH, Journal of Forest Products Research)
eISSN : 2442-8957 pISSN : 0216-4329
JPHH is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.