PEMANFAATAN LIMBAH SAGU SEBAGAI BAHAN PAPAN PARTIKEL
Abstract
The experiment result of using sago waste for particleboard is reported in this paper. The experiment covers the process of making particleboard with several raw material compositions and testing their physical and mechanical properties. The particleboard is bonded with urea formaldehyde resin with the dimension of 30 cm x 30 cm x 1,5 cm,
The results indicate that most of the physical properties of particleboard meet Indonesian or FAO standards, while many of mechanical properties do not meet those standards. Veneer lamination improves the bending strength and the addition of sago bark do not improve physical and mechanical properties of particleboard.
Full Text:
PDF (Bahasa Indonesia)References
Anonimus. 1966. Plywood and other wood - based panels.FAO, Rome-p. 126.
-1983. Papan partikel datar. Standar Industri Indonesia. (SIl. 0797-83). Departemen Perindustrian, Jakarta.
-1988. Studi kelayakan pemanfaatan dan pendaya gunaan sagu di pulau Seram Bagian Timur. Executive Summary. PT. Inhutani I, Jakarta. p. 1.
Haeruman, H. 1972. Prosedur analisa rancangan percobaan.Institut Pertanian Bogor, Bogor. pp. 8-20.
Sutigno, P., S. Kliwon dan R. Memed. 1979. Pengaruh jenis kayu dan campurannya terhadap beberapa sifat papan partikel. Laporan LPHH No. 144, Bogor. 15 pp.
DOI: https://doi.org/10.20886/jphh.1989.6.6.364-367
Refbacks
- There are currently no refbacks.
JURNAL PENELITIAN HASIL HUTAN INDEXED BY:
Copyright © 2015 | Jurnal Penelitian Hasil Hutan (JPHH, Journal of Forest Products Research)
eISSN : 2442-8957 pISSN : 0216-4329
JPHH is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.