EMISI GAS FORMALDEHIDA DARI BEBERAPA TINGKAT KETEBALAN KAYU LAPIS

Suwandi Kliwon

Abstract


In  this paper  the  determination    of  formaldehyde    gas emission   from  plywood  is presented.   Six  samples  were colected  from  several plywood  factories   in Indonesia  two  samples  were made  by  the center   for  Forest  Products  Research and Development   Laboratory  in Bogor.

The  results showed  that  the amount   of  formaldehyde   gas emission  from  plywood  varies from  3.080  ppm  (3.6 mm thick) to  9.933 ppm (for 18.0  mm thick)

References


Anonymus. 1981. Formaldehyde emission from plywood. Imported Hard wood Products Association, Inc. Washington, D.C.

Anonymus. 1982. The Test method for the evaporated amount of formaldehyde in the Japanese Agricultural Standard for Ordinary Plywood for Special Use, JAS method.

Anonymus. 1986. Purchase specification for 3-plywall panel imported hardwood plywood from Southeast Asia. Imported Hardwood Products Association, Inc. Washington, D.C.

Yung Shin Hyun, et. al. 1981. The Research Reports of the Forest Research Institute. No. 28. FPRI, Seoul Korea.




DOI: https://doi.org/10.20886/jphh.1988.5.3.128-130

Refbacks

  • There are currently no refbacks.


JURNAL PENELITIAN HASIL HUTAN INDEXED BY:

More...


Copyright © 2015 | Jurnal Penelitian Hasil Hutan (JPHH, Journal of Forest Products Research)

eISSN : 2442-8957        pISSN : 0216-4329

       

JPHH is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.